Brick Repair Denver repairs and restores historic brick and stone in Park Hill: repointing and tuckpointing, chimney repair, brick and stone replacement, cleaning and paint removal, and historic masonry restoration. Our approach is masonry repair over replacement, with mortar and brick matched to the original so the brickwork blends with the wall around it.
Most Park Hill homes are now a century old or more, and that age shows first in mortar joints, brick chimneys and masonry porches. Call (720) 445-9474 or request a consultation.
Our Masonry Services in Park Hill
- Tuckpointing and repointing: see the full section below.
- Brick restoration and replacement: matched brick by size, color and texture.
- Chimney repair: tuckpointing and repointing, chimney crowns and rebuilding above the roofline.
- Brick cleaning and paint removal: low-pressure steam cleaning, and paint removal in two stages with test panels first.
- Stone masonry repair: sills, foundations and porch stone.
- Foundation and structural masonry repair, brick veneer repair.
- Historic masonry restoration for designated landmarks.
Tell us about your brick. We will take it from there.
Start Your Project Request
- Tell us what you're seeing on the brick or stone
- Send photographs of the brick or stone and areas of concern
- We review and qualify the inquiry, then recommend the appropriate next step
Tuckpointing and Repointing in Park Hill
The oldest Park Hill houses date from the decades around its 1903 annexation, when brick was laid in soft lime mortar. That lime mortar was meant to be the weaker part of the masonry wall. It flexes with seasonal movement, lets moisture leave through the mortar joints and wears away slowly, so the brick does not have to.
Many of these homes have since been patched with hard Portland cement mortar. A mortar joint that is harder and less permeable than the brick beside it pushes water and stress into the brick faces, and the result is spalled edges and cracked brick units next to mortar repairs that still look sound. On Park Hill brick chimneys and porches, where snow sits and freeze and thaw cycles repeat all winter, that damage shows first.
Tuckpointing and repointing in Park Hill starts by identifying the original historic mortar and the later mortar repairs. We rake out the failed or incompatible mortar joints, match the new mortar to the original in color, strength, texture and joint profile, and tool it to the historic finish. On longer walls and later additions, where hard mortar repairs or tight mortar joints have trapped movement, we add relief joints so the wall can move without cracking the brick. The result is a masonry repair that protects the brick and blends with the wall. For the full process, see our tuckpointing and repointing service.

Park Hill Homes and the Masonry They Were Built With
Park Hill was platted in 1887 on land east of City Park, and much of it was built out in the decades after it was annexed to Denver in 1903. Its tree lawns, deep setbacks and parkways frame historic brick and stone homes.
Park Hill grew in stages. The southern blocks near Montview Boulevard and the 17th Avenue Parkway hold some of the earliest and largest houses, including Denver Squares. Bungalows followed, and post-war Cape Cods filled in as the neighborhood expanded north. Across those eras you will find solid brick walls, Craftsman porch columns, Tudor Revival homes with tall brick chimneys, and Colonial Revival brick with stone trim.
Before the houses, parts of the original Park Hill tract were dairy farms and brickyards. Today the brick on these homes is a finite material: when a brick unit fails, the right brick repair is a matched one, not a modern substitute.
Common Masonry Problems on Park Hill Homes
- Chimneys above the roof: wind, snow and freeze and thaw wear the mortar joints and chimney crowns first Chimney Repair.
- Worn or hard patched mortar joints: see Tuckpointing and Repointing in Park Hill above.
- Brick porch steps, piers and columns: constant snow and soil contact.
- Lintel cracks over windows and garage doors Brick Repair, Foundation and Structural Repair.
- Painted brick on older facades and fireplaces Brick Paint Removal.
- Stone sills and foundations Stone Repair.
Park Hill Project: Chimney and Home Repointing, Rebuilt Chimney Crown
In 2026, our masonry team repaired the chimney and brick walls of this Park Hill home. The chimney is a dual stack with two flues under a single chimney crown. We removed the deteriorated crown, rebuilt it completely and reset the individual Colorado red stone pieces that are part of the crown, then repointed the upper and lower sections of the chimney. On the house, we repointed the brick walls at various locations.
The Colorado red stone is an accent on this chimney and is also used on its shoulders. Its overhang naturally forms the chimney crown drip edge, so there was no need to form a drip edge in the cement crown. Instead, we tapered the crown to line up with the edges of the red stone, which lets the stone shed water and is a more sustainable, better-functioning approach for this chimney crown repair.
The home is built of clinker brick, and its original mortar joints were intentionally full and rough, almost overflowing the brick, with some edges recessed and others rounded out. For this clinker brick repointing, we matched the new mortar to the existing historic mortar in character and in compatibility with the age of the building. Wherever we repointed, we recreated that original tooling and mortar joint profile, so the new joints match the old ones and the masonry repairs blend with the wall around them.

- 2026Park Hill project completed
- 100%chimney crown rebuilt over both flues
- Originaljoint profile matched wherever we repointed
Chimney crown


Mortar joints on clinker brick





Follow the full chimney repair sequence on our chimney repair page: the assessment, the damage we found, the repointing and the finished crown.
How We Approach Masonry Repair in Park Hill
Every project starts with understanding the building: an assessment of the masonry and the cause of the damage, not just the crack. We favor masonry repair over replacement, match historic mortar in color, strength and joint profile, match brick by size, color and texture, and add relief joints where movement needs a place to go. Facades are cleaned with low-pressure steam cleaning, and paint removal follows our two-stage process with test panels first.
Historic Designation and Landmarks in Park Hill
Park Hill as a whole is not a designated Denver historic district. A district for the original 32 blocks was proposed in 2015 and paused for mediation in 2017. Some individual properties are designated Denver landmarks, and the East 17th Avenue Parkway has been on the National Register since 1986. If your home is a designated landmark, exterior masonry work can require Landmark Preservation review, and we plan the masonry repair with that in mind.
Park Hill Masonry Questions
Do you work on older brick homes in Park Hill?
Yes. We repair brick, stone and chimneys on homes across Park Hill, from early houses near Montview Boulevard to later bungalows and Tudor Revival homes further north. Every brick repair starts with an assessment of the masonry and the cause of the damage.
Is Park Hill a historic district?
Park Hill as a whole is not a designated Denver historic district. A district for the original 32 blocks was proposed in 2015 and paused for mediation in 2017. Some individual properties are Denver landmarks, and the East 17th Avenue Parkway is listed on the National Register. If your home is a designated landmark, exterior masonry work may need Landmark Preservation review, and we plan the masonry repair to meet it.
Why do so many Park Hill chimneys need work?
Many Park Hill homes have tall brick chimneys that stand above the roof with no wall to shelter them. Wind, snow and repeated freeze and thaw wear the mortar joints and the chimney crown first. Tuckpointing and repointing the stack and rebuilding a cracked chimney crown usually come before any rebuilding of brick.
Can you match the brick and mortar on my Park Hill home?
Yes. Our approach is masonry repair over replacement. We match the historic mortar in color, strength and joint profile, and we match brick by size, color and texture, often with reclaimed brick, so the brick repair blends with the original brickwork. On the Park Hill project shown on this page, the homeowner was very specific about matching the original mortar and its tooling, so the repointing blends with the surrounding brick.
What does chimney repair in Park Hill usually include?
It depends on the chimney. On the Park Hill project shown on this page, a dual chimney stack with two flues under a single chimney crown, we rebuilt the crown completely, reset the individual Colorado red stone pieces that are part of the crown, whose overhang forms the drip edge, and repointed the upper and lower sections of the chimney and various locations on the house. Flue inspection and liner work are referred to a chimney sweep.
Do you remove paint from brick in Park Hill?
Yes. Paint removal is a two-stage process. It starts with one or more test panels as a paid first phase, followed by paint removal and specialized conservation cleaning. Products are selected for the coating and the masonry, with a preference for gentler methods where suitable.
How do I start a project in Park Hill?
Call (720) 445-9474 or request a consultation. Send photographs of the brick or stone and the areas of concern, and tell us what you are seeing. We review and qualify the project, then recommend the appropriate next step.
Brick Repair in Park Hill and Nearby Neighborhoods
We work across Park Hill, North Park Hill, South Park Hill and Northeast Park Hill, and in nearby neighborhoods in Denver including City Park, Hale, Mayfair, Montclair, Crestmoor, Congress Park and Whittier.
We also serve Lakewood, Englewood, Littleton, Aurora, Arvada, Wheat Ridge, Golden, Edgewater, Boulder, Westminster, Centennial, Greenwood Village, Cherry Hills Village, Sheridan, Louisville, Fort Collins, Loveland, Castle Rock and Parker.
See our other neighborhood work in Capitol Hill, or browse all service areas.
Tell us about your brick. We will take it from there.
Start Your Project Request
- Tell us what you're seeing on the brick or stone
- Send photographs of the brick or stone and areas of concern
- We review and qualify the inquiry, then recommend the appropriate next step

